01 // Overview
Category 7 network cable with foil and braid screen
ANPU Cat 7 shielded network cable is a Category 7 network cable for high-immunity commercial cabling. This cat7 network cable uses AL-Mylar shielding plus braid screen for stronger noise control, with 600 MHz network cable Cat 7 speed for data-center, backbone and security monitoring routes.
02 // Specifications
Technical Datasheet
Executive standard
IEC 61156-5:2020
Product structure
FTP CAT7 4PRS
Conductor
Stranded conductor, 0.6 mm
Insulation
PE/FEP, 0.35 mm
Twist pitch
<= 20 mm
Shielding
AL-Mylar, 0.05 mm
Shielded connecting wire
1/0.35
Braid screen
16 x 8 x 0.12 mm
Sheath
PVC/LSZH, 0.6 mm
Operating temperature
+20 deg C to +60 deg C
Maximum transmission frequency
600 MHz
Finished cable outer diameter
8.0 mm
Cable weight
19.1 kg/305 m
Flame retardant characteristic
Complies with IEC 60332-1-2
Electrical Performance
| DC resistance of single conductor at 20 deg C | <= 9.5 ohm/100m |
| DC resistance unbalance between two internal conductors | <= 2% |
| Dielectric strength between conductors | 1kV/1min DC |
| Insulation resistance at 20 deg C | >= 5000 Mohm-km |
| Working capacitance | <= 5.6 pF/100m |
| Line-to-ground capacitance unbalance | <= 160 pF/100m |
Mechanical Property
| Original tensile strength of insulation | >= 16 MPa |
| Original breaking elongation of insulation | >= 200% |
| Original tensile strength of sheath | >= 10 MPa |
| Original breaking elongation of sheath | >= 125% |
03 // Built-to-Spec
Cat 7 Shielded Network Cable Customization Options
Cat 7 Shielded Network Cable can be customized around construction, voltage class, conductor, insulation, sheath, marking, packing and documentation requirements.
ANPU supports project-based cable supply for engineering drawings, procurement specifications and export shipment plans.
Specify Your Required Construction. ANPU Manufactures to Match.
Share the construction, standard, marking, packing and documentation requirements. ANPU’s engineering team confirms the build before production.
CUSTOM // OEM // ODM
CUSTOM OPTION
VARIANT 01
Cable Construction
Cat 7 Shielded Network Cable can be supplied as FTP CAT7 4PRS for matching installation environment, electrical performance and project documentation needs.
CUSTOM OPTION
VARIANT 02
Project Specification
ANPU can quote by rated voltage, conductor (Stranded conductor, 0.6 mm), insulation, sheath (PVC/LSZH, 0.6 mm), marking and packing requirements.
CUSTOM OPTION
VARIANT 03
Standards & Marking
Manufacturing, cable marking and datasheet details can be prepared with reference to IEC 61156-5:2020.
CUSTOM OPTION
VARIANT 04
Custom Supply
Jacket color, print legend, cable length, reel or coil packing and export documents can be arranged for project orders.
Available Build Options
OPTION 01
FTP CAT7 standard production
FTP CAT7 standard production keeps the product structure aligned with FTP CAT7 4PRS. Conductor: Stranded conductor, 0.6 mm.
OPTION 02
PVC or LSZH sheath
PVC or LSZH sheath lets buyers select the outer material or jacket finish for installation and compliance needs. Sheath/Jacket: PVC/LSZH, 0.6 mm.
OPTION 03
Custom color, printing and reel packing
Custom color, printing and reel packing supports cable identification, circuit grouping and brand or project marking on the outer jacket.
04 // Applications
Where Cat 7 Shielded Network Cable Is Used
Cat 7 Shielded Network Cable is designed for Category 7 network cable routes where 600 MHz performance, braid screening and stronger interference control are required.
01
High-immunity network cabling
Cat 7 Shielded Network Cable helps network routes in electrically noisy spaces by combining the required Cat-family transmission level with shielding-oriented construction.
02
Commercial network backbones
Cat 7 Shielded Network Cable fits commercial building communication systems, including floor distribution, weak-current rooms and structured cabling backbones.
03
Data-center communication wiring
Cat 7 Shielded Network Cable can be used for data-center cabinet cabling, network patch cable areas and horizontal distribution routes where cable diameter, packing length and route management matter.
04
Security and monitoring systems
Cat 7 Shielded Network Cable is suitable for camera, access-control and monitoring network routes that need stable signal transmission and reliable jacket protection.
05 // Project Cases
Project References
ANPU supports project cable supply for building, industrial, power, control and communication applications, with construction, packing and documentation aligned before shipment.
PROJECT 01
Cat 7 Shielded Network Cable
Cat 7 Shielded Network Cable Supply Scope
ANPU can supply FTP CAT7 4PRS with matched conductor, insulation, sheath, marking and packing requirements for purchase orders.
SCOPE // Project reference | STATUS // Available on request
PROJECT 02
Cat 7 Shielded Network Cable
High-immunity network cabling Project Use
For High-immunity network cabling and Commercial network backbones, Cat 7 Shielded Network Cable can be prepared around route length, installation environment and documentation needs.
SCOPE // Project reference | STATUS // Available on request
PROJECT 03
Cat 7 Shielded Network Cable
Cat 7 Shielded Network Cable Inspection & Delivery
Before shipment, ANPU can check Stranded conductor, 0.6 mm, PVC/LSZH, 0.6 mm and IEC 61156-5:2020, then provide packing labels and export documents.
SCOPE // Project reference | STATUS // Available on request
06 // The Manufacturer
ANPU Cable Manufacturing & Quality Control for Cat 7 Shielded Network Cable
For network cable and Ethernet cable orders, ANPU controls conductor size, insulation diameter, pair twist, shield structure when specified, jacket thickness and transmission-related inspection items. Cat 7 Shielded Network Cable orders are prepared around IEC 61156-5:2020, Stranded conductor, 0.6 mm and PVC/LSZH, 0.6 mm. Project orders can include agreed marking, datasheet, packing label and shipment documentation.
28+ Years
300+ Staff
70+ Countries
Pair & Jacket QC
Factory-Level Quality Management
CE (EU export), CCC (China Compulsory Certification), UL, RoHS Compliant and Final Quality Control (FQC) sign-off on every drum. ISO 9001:2015, ISO 14001 and ISO 45001 management systems, plus Hubei Provincial Industrial Production Licence — product-specific test reports available on request via the Service Center.
07 // FAQ
Engineer & Procurement FAQ
What transmission frequency does Cat 7 Shielded Network Cable support?
+
This network-cable construction supports 600 MHz.
What conductor is used in Cat 7 Shielded Network Cable?
+
The conductor construction is Stranded conductor, 0.6 mm.
What sheath or jacket does Cat 7 Shielded Network Cable use?
+
The sheath/jacket construction is PVC/LSZH, 0.6 mm.
What is the finished cable diameter?
+
The finished cable outer diameter is 8.0 mm.
What temperature range applies to Cat 7 Shielded Network Cable?
+
The temperature reference is +20 deg C to +60 deg C.
What flame performance is available?
+
The flame performance reference is Complies with IEC 60332-1-2.
What standard is referenced for Cat 7 Shielded Network Cable?
+
Cat 7 Shielded Network Cable is manufactured with reference to IEC 61156-5:2020.
What does FTP CAT7 4PRS mean?
+
FTP CAT7 4PRS refers to the category level, pair count and shielding/UTP construction used for this network cable.
Where does Category 7 network cable make sense?
+
Category 7 network cable is useful for high-immunity commercial routes, data-center communication wiring and backbone routes that need stronger shielding.
What network cable Cat 7 speed is supported?
+
This FTP CAT7 construction is specified for 600 MHz transmission.
Is Cat 7 different from Cat6A?
+
Yes. This product uses the CAT7 construction with AL-Mylar shielding and braid screen. Cat6A products remain separate at the Cat6A product boundary.
08 // Get a Quote
Send ANPU Your Cat 7 Shielded Network Cable Requirements
Share the required specification, construction, quantity, marking, packing and documentation. ANPU will confirm the details before quotation.
